If you have a site or an app, pace is essential. The swifter your web site performs and then the speedier your web apps function, the better for you. Given that a site is only a selection of data files that connect with one another, the devices that store and access these data files play an important role in site efficiency.

Hard disks, or HDDs, were, until the past few years, the most efficient products for keeping data. Nevertheless, in recent times solid–state drives, or SSDs, are actually gathering popularity. Check out our comparability chart to find out if HDDs or SSDs are better for you.

1. Access Time

Image

With the launch of SSD drives, file access speeds have gone through the roof. Thanks to the completely new electronic interfaces utilized in SSD drives, the common data file access time has shrunk to a record low of 0.1millisecond.

Image

HDD drives depend on spinning disks for files storage purposes. When a file will be utilized, you need to await the right disk to reach the correct position for the laser beam to view the data file in question. This translates into a standard access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is critical for the performance of any data file storage device. We’ve conducted substantial assessments and have determined that an SSD can manage at least 6000 IO’s per second.

Image

Hard drives present slower data access speeds because of the older file storage and access concept they’re employing. In addition, they display considerably sluggish random I/O performance matched against SSD drives.

For the duration of our lab tests, HDD drives maintained around 400 IO operations per second.

3. Reliability

Image

SSD drives lack any moving parts, which means there’s much less machinery inside them. And the less literally moving components you will discover, the fewer the possibilities of failure will be.

The regular rate of failure of any SSD drive is 0.5%.

Image

With an HDD drive to work, it needs to spin two metal disks at a minimum of 7200 rpm, having them magnetically stable in mid–air. There is a wide range of moving elements, motors, magnets and also other tools loaded in a tiny location. Hence it’s obvious why the regular rate of failing of an HDD drive varies between 2% and 5%.

4. Energy Conservation

Image

SSD drives operate practically soundlessly; they don’t make extra heat; they don’t involve added cooling methods as well as take in much less power.

Tests have demonstrated the common electricity utilization of an SSD drive is amongst 2 and 5 watts.

Image

From the time they have been built, HDDs have always been quite electrical power–greedy systems. So when you’ve got a hosting server with many types of HDD drives, this will likely boost the regular utility bill.

Typically, HDDs take in in between 6 and 15 watts.

5. CPU Power

Image

SSD drives permit a lot faster data access speeds, which generally, in turn, allow the CPU to perform file queries faster and to go back to other responsibilities.

The standard I/O hold out for SSD drives is only 1%.

Image

HDD drives allow for sluggish access speeds in comparison with SSDs do, resulting for the CPU having to hold out, although saving assets for your HDD to discover and return the demanded data file.

The typical I/O wait for HDD drives is about 7%.

6.Input/Output Request Times

Image

In the real world, SSDs perform as admirably as they managed throughout the testing. We ran an entire system back–up using one of our production servers. Throughout the backup operation, the average service time for any I/O requests was in fact below 20 ms.

Image

Throughout the identical lab tests using the same server, now suited out using HDDs, functionality was substantially sluggish. All through the server back up procedure, the standard service time for any I/O demands fluctuated somewhere between 400 and 500 ms.

7. Backup Rates

Image

You can easily notice the real–world benefits of using SSD drives each day. For example, on a web server pre–loaded with SSD drives, a complete backup is going to take only 6 hours.

Image

Over time, we’ve employed mostly HDD drives with our servers and we are knowledgeable of their overall performance. With a web server designed with HDD drives, a complete server data backup normally takes about 20 to 24 hours.

With Bluemotorcycle Hosting, you will get SSD–driven hosting services at good prices. Our shared website hosting plans incorporate SSD drives automatically. Get an web hosting account here and witness the way your sites will become far better without delay.

  • Service guarantees

  •  
  • Subscribe now. There are no setup service fees you’ll also find full root and SSH access to the server. 99.9% network availability is warranted.

  • Compare our prices

  •  
  • Very easily examine the resources and features provided by Bluemotorcycle Hosting’s Virtual Private Servers. Find out exactly which VPS package will give you everything that you want to deal with your dynamic online presence with no trouble.
  • Compare our hosting plans

  • Contact Us

  •  
  • Get in touch with us 24 hours a day by email or by using our really–fast ticketing system. Our technicians are prepared to respond to all of your requests within 1 hour.